Skid steer plow
The BOSS Snowplow has expanded its Trip-Edge Snowplow lineup and now offers skid-steer owners three new Trip-Edge Plow options including a 7.5-foot, 8-foot and 9-foot model. The adjustable mounting height on each of the plows has been engineered to accommodate both track and wheel skid-steer loaders. The plow features a trip-edge or base angle that is hinged on heavy-duty 1-inch diameter steel pivot pins with adjustable extension-style trip springs. The trip-spring mechanism can be adjusted to accommodate the job and allows for a smooth, even trip when striking an obstacle.
Circle (512) on Reply Card ▪ freeproductinfo.net/gm
Hiniker Company's expanded snow- and ice-control product line now includes two stainless-steel salt and sand spreaders. The 6.5-foot Model 620 is powered by an 8-hp engine and is designed to fit full-size, short-box pickups. The 8-foot Model 820 uses a 10.5-hp industrial/commercial engine and fits standard box trucks. Corrosion-resistant stainless steel is used to form the hopper, the hood, the engine plate and the spinner chute, disc and deflectors. Standard hopper capacities are 1.45 cu. yd. For the 6.5-foot unit and 1.78 cu. yd. For the 8-foot unit.
Circle (513) on Reply Card ▪ freeproductinfo.net/gm
Plow mounting system
The new Minute Mount 2 from Fisher Engineering is a snow attaching/removal system designed to eliminate hassle and save time. It features a built-in handle to disengage both connecting pins simultaneously for removing the plow; a lower gear that is flared twice as wide for easier drive-in alignment; a spring-loaded lift chain to automatically retract the life arm; and a stylish new look to complement today's new trucks.
Circle (514) on Reply Card ▪ freeproductinfo.net/gm
Snowman is expanding its line of commercial pull plows to include the new 70 CashSaver. Patterned after the model 70+SC, the CashSaver model offers the same features as its counterpart, but with a reduced price tag. It features a 12-gauge rolled steel moldboard, is 7 feet long and 23 inches high. It is equipped with patented spring trip to protect the plow and vehicle, exclusive high lift to reach over drifts and carries a one-year limited warranty on parts and labor. The CashSaver is operated with hydraulic down pressure and includes box wings, jack stand and cab controller as standard with each unit.
Circle (515) on Reply Card ▪ freeproductinfo.net/gm
The Stihl PowerSweep KW 85 is now available as an interchangeable gearbox attachment for the FS 83R and the FS 85R, enabling you to convert your grass trimmer into a gas-powered sweeper. The KW 85 attachment is designed for fast, efficient cleanup and removal of debris on wet and dry ground surfaces. It's also useful for cleaning caked dirt on sidewalks and roadways, clearing light snow or removing pebbles from lawns. Stihl's belts and fins are made of pliable Dupont Alcryn, which minimizes damage to grass or sod. In addition, the new KW attachment design incorporates a protective rubber strip connected to the gearbox to ensure that the drive tube does not wear down during use.
Circle (516) on Reply Card ▪ freeproductinfo.net/gm
Use your zero-turn mower for light snow clean-up with the JRCO V-Broom Sweeper. The V-shape is designed to clean large areas of sidewalk. The wings quick-adjust for angled or 60-inch-wide straight shapes with two clevis pins. The V-Broom Sweeper has 8-inch polypropylene bristles, spaced in three rows for optimum snap action and a clean sweep without loading. The broom attaches to the JRCO mount bar with two clevis pins.
Circle (517) on Reply Card ▪ freeproductinfo.net/gm
Snow push attachment
FFC Attachments announces the new 12- and 14-foot Snow Push models, engineered of heavy-duty, fully-welded steel with ⅜-inch-thick end plates to capture and remove even the heaviest snow without leaving windrows or spillover. Using the Pull Back Kit, the operator can roll the blade forward to finish the job. In “pull” position, the Snow Push moves in next to buildings, fences and other obstacles to pull snow away cleanly. Both models will work with all 4-wheel-drive backhoe-loader models and most small-wheel loaders.
Circle (518) on Reply Card ▪ freeproductinfo.net/gm
Snow blower attachment
FINN Corporation offers the two-stage Snow Blower attachment for its Eagle product line. The Snow Blower is available in both clearing widths of 40 and 48 inches wide. Features include an electronically-controlled discharge chute that rotates 180 degrees with controls conveniently placed near the operator, an adjustable chute deflector and a hydraulic system flow rate of 13.25 gpm at 3,000 psi. Additional options include the Wind Break, which helps protect the operator from the elements, and the Work Light Kit, which uses two bright work lights mounted to the Eagle for operating in reduced visibility conditions.
Circle (519) on Reply Card ▪ freeproductinfo.net/gm
SnowEx, a division of TrynEx International, has introduced the new Vee Pro 6000 salt and sand spreader. Designed primarily for bulk material spreading, the unit's hopper is constructed entirely of heavy-duty polyethylene, which eliminates corrosion. The lightweight Vee Pro, which is 60-percent less weight than steel units, can be installed or removed by two people, freeing the vehicle to perform multiple applications. A patented multi-angle hopper with inverted-“V” assembly facilitates efficient material movement.
Circle (520) on Reply Card ▪ freeproductinfo.net/gm
Snowplow attaching and removal system
In order to design a better attaching system, Western Products surveyed plowers to find out what was most important to them. The overwhelming response was to make the on/off procedure simpler. Western engineers responded by developing the UltraMount System. Key features include a drive-in attachment; a pivot bar that rotates, allowing the drive-in points to remain level — even when the blade is not; and two receiver brackets on the vehicle that are easily removable for better off-season ground clearance — no tools required.
Circle (521) on Reply Card ▪ freeproductinfo.net/gm
Snow Wolf's Ultra Series is a snowplow specifically designed for the skid steer, with blade features and frame construction built to match the skid steer's ability to move a heavy snow load. It's available in seven widths from 6 to 9 feet. The blade is angled to scoop snow rather than push it, then send the snow rolling, moving it off the blade quickly to keep the skid steer in control of the heavy snow load. A dual pivot, A-frame construction allows the blade to oscillate, following the contours of uneven ground without scraping. For sensitive areas, such as paving stones, a soft-touch cutting edge can be used to no steel contacts the surface.
Circle (522) on Reply Card ▪ freeproductinfo.net/gm
Want to use this article? Click here for options!
© 2016 Penton Media Inc.